Hohner Soprano reedplate access

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
  • #11346
    AvatarJeremy Stokes

    Hello everyone

    My name’s jeremy and I’m new to the forum. I’ve recently bought a hohner soprano and an alto, both metal bodies and in near mint condition. The only problem is that the D next to middle C on the soprano is a C#. Even if this was an accident at the factory when the melodica was made i was confident that I could tune the reed up, but upon removing all of the screws from the back of the melodica I was unable to take off the back cover. It appears to be glued into place.

    Does anyone have experience of servicing these early hohner models?


    Hi Jeremy!
    I have the exact same problem on a Hohner Cassotto 26. Have you managed to solve it?



    AvatarJeremy Stokes

    Hello Allessandro

    I’ve had no luck I’m afraid. I really don’t want to force it open so I may just have to buy another.

    Good luck yourself


Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.
Back to top button