[Melodica-Me]

Daren, my melodica shop is more of a melodica work area in my office. My work bench is quite simple, a Sieg mini mill, a Byrnes modelers 4″ table saw, a hand miter saw, some traditional hand tools and tooling for the mill. I have attached a site so you can see some pictures. I would like to buy a micro/mini lathe before I start the new melodica project and if the budget allows, a modelers 5″ disk sander (more accurate). I have a large disk in my garage from my cabinet making days but it’s not really good for small/miniature work. I did make some tooling, jigs and fixtures that can be used on my next melodica project so I will not have to spend time on that. I had to make a micro threading machine so I could do a M1 thread on the key post and a adjustable angle plate fixture so I could drill and tap on a 4 degree angle, it would have been extremely difficult to do by hand consistently.

Hey lets not forget about Tatu, I think he has a new project going on now.

I am terible at uploading pictures and videos so hopefully they will come out, if not I attached the site where you can see them.

Melodica-Me

http://s355.photobucket.com/user/BigPwr/library/Melodica%20Work%20Bench?sort=3&page=1