Reply To: Hammond H44 Pro Mic Impedance
Hello Aartsen, I have been using pedals with the Hammond 44 and HP and other Melodicas for a long time. We know that the mic is a dynamic mic but not sure of the impedance I want to assume that it is high since the primary out is 1/4″ mono. It does need some sort of preamp to boost the signal especially if you are going to use effect pedals. I use a simple Ernie Ball volume pedal that works fine. The attached pictures are examples of my pedals. please let me know if you have questions of the pedals shown or any other questions on the set up.
hope this helps.
Melodica-Me