Reply To: Hohner Pro 36
Hello Zoran, the pin is not easy to remove, especially if you do not do it as I mentioned in my previous post. The pin must be rotated and pulled at the same time. The use of WD-40 lubricant, sprayed at each point of exposure of the pin. This means in between the keys and body and left to penetrate over night. You can’t use regular pliers, you need to use vise grips. I have removed several of these and they have all been tight. As for adding anything to the pads I am not sure of this as this would not be a permanent repair so why bother (my opinion) I am a little OCD lol. I replaced some pads in the past by leaving the key in place but you need to make sure you remove all the glue from the key before you install the other pad or it will not sit evenly. Question, is Martin sure the pads are leaking?.
Melodica-Me